Audio System for Your UTV - Why are there such big differences between options?
When looking for an audio system for your UTV, you'll quickly come across a huge range of different options – whether you drive a Polaris Ranger or RZR, Can-Am Maverick or Traxter, or a CFMoto CForce or ZForce. There are basic two-speaker setups, generic soundbars and other Bluetooth speakers, as well as complete audio packages and full-scale sound systems.
If you only compare the price or number of speakers, many of these packages may look very similar on paper. In reality, however, there can be a huge difference in sound quality, features, installation quality, and overall finish.
Our approach to UTV audio packages has been different from the start. We don't simply want to add a few speakers to your UTV – we want to build a genuinely high-quality audio system that sounds great and integrates as cleanly as possible into the vehicle's interior.
At the same time, the system can be built according to your needs and budget. If you're simply looking for good basic sound and an easy way to stream music from your phone, you don't necessarily need the most expensive touchscreen head unit. Even a rear-speaker-only setup can go a long way. On the other hand, if you're looking for a fully equipped premium system, we can build that too!
Explore our vehicle-specific UTV audio packages!
Explore our range of vehicle-specific UTV audio packages!
How Much Does a Proper UTV Audio Package Cost?
If you're looking for a more comprehensive system with front and rear speakers, a touchscreen head unit, and a subwoofer, our packages typically fall within the €1,600–€1,700 price range.
Naturally, the final price depends on the type of system you want to build. You can choose a cost-effective 1-DIN Bluetooth head unit, or go all the way up to a premium installation featuring a large 9" touchscreen display.
This isn't the cheapest possible way to get music playing in your UTV – and it isn't meant to be. Our goal is to offer solutions for different budgets without compromising the quality of the audio system or the installation itself.
For the price, you get high-quality components from established brands, proper installation accessories, and a vehicle-specific solution where considerable attention has also been paid to how the finished installation looks.
Choose the Right Head Unit for Your Needs – From 1-DIN to a 9" Display
Not everyone needs the same features in their UTV. That's why the head unit can be selected according to what you actually want from your system.
1-DIN Bluetooth Head Unit – When Music Is What Matters Most
If your main goal is simply to get high-quality sound and stream music from your phone via Bluetooth, a traditional 1-DIN head unit is a sensible choice.
It keeps the overall system cost-effective and easy to use while still giving you a proper head unit from a well-known manufacturer such as Pioneer or Kenwood.
This is an excellent option for customers who don't need a large touchscreen, navigation, or other multimedia features and simply want to focus on making their music sound good.
2-DIN Touchscreen Head Unit – More Features and a Modern User Experience
If you want more features from your UTV, the system can be built around a 2-DIN touchscreen head unit.
Depending on the package and head unit, features such as Apple CarPlay and Android Auto are available, allowing compatible smartphone functions to be accessed directly from the head unit's display.
This also makes features such as navigation significantly more convenient to use.
A 2-DIN head unit is an excellent middle ground for anyone who wants a quality audio system combined with modern multimedia features without going all the way to the largest premium display.
9" Touchscreen Head Unit – When You Want a True Premium Feel
If your goal is to build a truly premium and impressive UTV interior, a large 9-inch touchscreen head unit is also available.
The larger display completely changes the appearance of the cockpit. It is no longer simply a device for controlling the audio system – it becomes a highly visible part of the interior and gives the entire vehicle a much more modern and premium appearance.
Music controls, wireless Apple CarPlay, Android Auto, and navigation are clear and easy to use on the large display. When properly installed, the head unit looks like it was designed to be part of the vehicle.
If you want to give your UTV a genuine premium feel, a 9" display is an impressive way to complete the audio system.
With Our Systems, Bluetooth Doesn't Mean a Cheap Bluetooth Controller
This is another important difference between the various ready-made audio packages on the market.
Some systems use a small universal Bluetooth controller as the "head unit." You connect your phone to it, play your music, and technically it gets the basic job done.
Our approach is to use proper Pioneer and Kenwood car audio head units, with different options available depending on the customer's requirements.
Gladen Speakers – No Compromises on Sound Quality
The head unit is only one part of the complete system.
For our speakers, we use high-quality Gladen components rather than simply choosing the cheapest possible speakers from unknown manufacturers.
Inside a UTV, the audio system has to compete with engine noise, drivetrain noise, tyres, and other sounds generated while driving. The fact that sound comes out of a speaker doesn't necessarily mean that the system is enjoyable to listen to on the move.
With quality speakers, a properly designed installation, optimised enclosure volumes, and a subwoofer, the system delivers significantly more power, clarity, and control. Music remains clear even while driving, and increasing the volume doesn't automatically make the sound harsh, distorted, or unpleasant.
Vehicle-Specific Installation Makes a Huge Difference
In addition to sound quality, one of the most important things to us is how the finished system looks inside the UTV.
Many universal audio packages use separate generic speaker pods mounted to the dashboard or wherever they can be attached most easily.
The solution may work, but it is often immediately obvious that the system is a universal aftermarket installation.
Our approach is the opposite.
Our enclosures and installation solutions are designed specifically for the vehicle, allowing the speakers, head unit, and other components to be positioned as naturally as possible within the interior. We design and manufacture our installation enclosures ourselves.
When everything is done properly, the audio system blends naturally into the UTV's interior instead of looking like a collection of aftermarket accessories bolted on afterwards.
The goal is to create a clean, almost factory-installed appearance – something that looks like it could have been fitted to the vehicle from the factory.
This becomes even more important with a large 9" touchscreen head unit. When properly integrated, the large display doesn't look like a tablet that has simply been attached to the dashboard afterwards. Instead, it becomes an impressive and natural part of the entire cockpit.
A Subwoofer Completes the System
When you want genuinely good sound, bass reproduction also needs to be taken into account.
The purpose of a subwoofer isn't simply to make the body panels of your UTV shake or cause hearing damage to the passengers. When implemented correctly, it handles the lowest frequencies and allows the rest of the speaker system to focus on the frequencies it reproduces best.
The result is a system that sounds fuller, more powerful, and better balanced.
Installation is just as important when it comes to the subwoofer. The enclosure needs to be properly matched to the subwoofer while also fitting into the limited space available inside the UTV, without unnecessarily sacrificing useful space or looking like a random box placed inside the vehicle.
Not All Ready-Made Audio Packages Are the Same
When comparing two UTV audio packages online, it's worth looking beyond the price tag and checking what you're actually getting for your money.
On paper, both packages might list Bluetooth, four speakers, and a subwoofer. That alone tells you very little about the actual quality of the system.
Check which brands are used for the speakers and head unit. Is there a proper car audio head unit or just a basic Bluetooth controller? Are Apple CarPlay and Android Auto available if you want them? Are the speaker enclosures universal, or have they been designed specifically for your UTV? And what does the finished installation actually look like?
Our packages are built around high-quality Pioneer and Kenwood head units, Gladen speakers and amplifiers, proper installation accessories, and vehicle-specific enclosures and installation solutions.
The difference can be seen – and heard.
Build an Audio Package That Suits Your Needs
A good UTV audio system doesn't automatically have to mean choosing the most expensive possible setup.
Want good music without making a huge investment? Choose a quality 1-DIN Bluetooth head unit and invest in good speakers. For example, you could start with rear speakers and a subwoofer.
Want modern multimedia features and a more comprehensive audio system? A 2-DIN touchscreen head unit with Apple CarPlay and Android Auto is an excellent choice. Add front speakers to complete the setup.
Want a genuine premium feel in your UTV? Combine a large 9" touchscreen head unit with front and rear speakers and a subwoofer, and the entire cockpit and user experience move to a completely different level.
Whichever option you choose, the basic principle remains the same: high-quality components, great sound, and a clean vehicle-specific installation.
Our audio packages are designed for customers who want something better than low-quality speakers mounted wherever they happen to fit.
Our goal is to offer audio systems that sound great, look great, and integrate so naturally into the UTV's interior that the finished installation looks almost factory fitted.